§ 60.280. Applicability and designation of affected facility.
159 words·~1 min read·
/us/cfr/t40/s§ 60.280·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)The provisions of this subpart are applicable to the following affected facilities in kraft pulp mills: Digester system, brown stock washer system, multiple-effect evaporator system, recovery furnace, smelt dissolving tank, lime kiln, and condensate stripper system. In pulp mills where kraft pulping is combined with neutral sulfite semichemical pulping, the provisions of this subpart are applicable when any portion of the material charged to an affected facility is produced by the kraft pulping operation.
(b)Except as noted in § 60.283(a)(1)(iv), any facility under paragraph
(a)of this section that commences construction, reconstruction, or modification after September 24, 1976, and on or before May 23, 2013 is subject to the requirements of this subpart. Any facility under paragraph
(a)of this section that commences construction, reconstruction, or modification after May 23, 2013 is subject to the requirements of subpart BBa of this part. [51 FR 18544, May 20, 1986, as amended at 79 FR 18966, Apr. 4, 2014]
Connections2 cite this
Cited by 2 sections
Citation graph
cites case law
§ 60.280
Applicability and designation of affected facility.
Fed. Reg.×2
Cites 0Cited by 2 across 1 source